Cannondale 120027.PDF Скачать руководство пользователя страница 3

120027.PDF

3

intended use

Gravity, Freeride, Downhill

INTENDED

  for riding that includes the most 

difficult terrain that only very skilled riders should 
attempt. 

Gravity, Freeride, and Downhill are terms which 
describe hardcore mountain, north shore, dirt 
jumping, slopestyle, hucking etc.   This is “extreme” 
riding  and the terms describing it are  constantly 
evolving.  

Gravity,Freeride, and Downhill bikes are heavier 
and have more suspension travel than All-
Mountain bikes,  allowing them to be ridden in 
more difficult terrain, over larger obstacles and 
larger jumps.  Gravity,Freeride, and Downhill bikes 
are bikes are the longest in suspension travel and 
use components that fit heavy duty intended use.  
While all that is true, there is no guarantee that 
some extreme riding will not break a Freeride bike.

The terrain and type of riding that Freeride 
bikes are designed for is inherently dangerous. 
Appropriate equipment, such as a Freeride bike, 
does not change this reality. In this kind of riding, 
bad judgment, bad luck, or riding beyond your 
capabilities can easily result in an accident, where 
you could be seriously injured, paralyzed or killed.    

NOT INTENDED

 to be an excuse to try anything!  

Read our “Freeride & Downhill” warning on pages 

4 and 5.

TRADE OFF

   Freeride bikes are more rugged than 

All-Mountain bikes, for riding more difficult terrain. 
Freeride bikes are heavier and harder to ride uphill 
than All-Mountain bikes. 

WARNING

USING YOUR BICYCLE IMPROPERLY IS 

HAZARDOUS.

Содержание 120027.PDF

































Отзывы: