Cannon TRADITIONAL 60, Руководство пользователя

Страница: 8 / 36

Switch on the electricity supply to the cooker at the Cooker Control Unit.
Dual Circuit Oval
Hotplate control
Hob Controls
Right Front Control
Main Oven Light
Cooling Fan
As each control knob is turned clockwise, numbers from 1 - 6 on the control knob
increase. Setting 6 is the highest/hottest and gives 100% power. Setting 1 is the
lowest/coolest and gives about 7% power.
Variable power is obtainable on each of the heating areas by selecting any number
between 1 & 6.
This is to control a dual circuit oval hotplate with two elements. By turning the
knob clockwise both parts of the hotplate are switched on, numbers 1-4 on the
control knob, 4 is the highest setting. With the knob turned anti-clockwise, only
the inner part of the hotplate is switched on, this is also indicated by numbers 1-4
on the control knob, 4 is the highest setting. Variable power for either the whole or
the inner part of the hotplate is obtained by selecting any number between 1 & 4.
The off position is identified by an ‘0’.
The hob hot warning lights will operate soon after each of the heating areas have
been switched on. Each warning light will remain illuminated until each heating
area has cooled down.
The main oven light can be switched on, when the oven is not in use, by pressing
the oven light button on the display. The oven light will also operate whenever the
main oven door is opened.
NOTE:
The oven light can be switched off when the door is opened by pressing
the oven light button on the display, or by closing the door.
The cooling fan operates with the ovens and grill. The fan will operate at full speed
for a few seconds and then reduce to a lower speed. The cooling fan will only
increase to full speed if the temperature inside the cooker reaches above a certain
limit.
Hob Controls
Main
Oven
Control
Timer
Top
Oven
Control
Grill
Control
8
THE
CONTROLS