15
From the
depth screen
, press the menu key once. The screen shows the user-
set depth limit that the weight will travel to regardless of the bottom depth. Press
the
UP
key to increase and
DOWN
key to decrease.
Caution
: For obvious
reasons, this limit must not exceed the bottom depth and/or the length of the
cable. Complete running out of the cable will result in back spooling or loss of
cable.
Now press the RUN key to activate the Bottom Following feature or press RCL
key to adjust the distance that the weight is to remain off the bottom. The range
is from +50 to -50 feet. Use the negative range to compensate for the
Blowback
of the weight at high trolling speeds. Press the UP or DOWN key to increase or
decrease the value and press RUN key to activate the Bottom Following or
press RCL key once more to adjust the sensitivity of the weight depth
adjustment to minor variations in depth and/or motion of the boat due to wave
action. Use UP or DOWN key to adjust. The range is 1 to 16 feet. For relatively
calm water, start with a setting of 4 feet. The weight will now adjust its depth
only when the bottom depth
increases
by 4 feet or more. However, it will always
adjust for any
decrease
in bottom depth regardless of this setting.
Bottom Following Menu
Cycling Menu
From the
depth screen
, press the
MENU
key twice (or once from the Bottom
Following screen) to enter this menu. The first screen allows you to adjust the
pause time of the weight between cycling movements. Press
UP
or
DOWN
to
adjust. You can adjust the
cycle time
in steps of 5 second increments from 10 to
60 seconds.
Press
RCL
to adjust the
cycle depth,
the weight’s distance of travel
up from the
current depth
. Press
UP
or
DOWN
key to increase or decrease this value from 5
to 20 feet. NOTE: Cycling feature requires a minimum clearance of 5 feet from
the water surface to the top of the depth cycle. For instance, if the weight is at
21 feet and if you set the cycling depth to 17 feet, no action would occur since
the distance from the water surface to the top of the depth cycle is 21 - 17 = 4
feet.
Up Speed Menu
This menu lets you adjust the speed of the weight in the UP direction at all times
except
during the AUTO UP operation.
Press the
MENU
key four times from the
depth screen
or once from the
zero
depth
menu. Use
UP
or
DOWN
key to select one of three possible speeds:
FAST, MEDIUM and SLOW.
Down Speed Menu
This menu lets you adjust the speed of the weight in the DOWN direction at all
times.
Press the MENU key five times from the
depth screen
or once from the UP
Speed menu. Use UP or DOWN key to select one of three possible speeds;
FAST, MEDIUM and SLOW.
PE
RA
TING & P
R
OG
RA
MMIN
G
AnglingOutpost.com
1-888-356-5022
AnglingOutpost.com
1-888-356-5022
