Cannon CT-2000, Руководство пользователя

Страница: 19 / 40

17
CANNON
® CT-2000 Constant Temperature Bath
Revision 1.0g—February, 2012;
CANNON
® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
The front panel of the CT-2000 provides a Liquid Crystal Display (LCD)
screen and a simple keypad interface (see
Figure 12 ).
1 2 ) .
Figure 12: The CT-2000 front panel
Using the keypad
The keypad on the front panel of the CT-2000 consists of fifteen keys:
„
white numbers 0 through 9
„
a white decimal point (.) key
„
a yellow
SET TEMP
(set temperature) key
„
a yellow CAL TEMP (calibrate temperature) key
„
a yellow
MENU
key
„
an orange
ENTER
key
The keys on the bottom row (non-numerical keys) may illuminate to
assist the operator in selecting key entry options.
Press the appropriate keypad choice(s) firmly to make your selections.
The CT-2000 will signal reception of each keypad command with a short,
high-pitched “beep”. A longer beep indicates a data entry error (unaccept-
able input), such as a temperature value outside the range of the unit.
The ENTER button
The
ENTER
button is the most-used feature on the CT-2000 keypad. You
must confirm each menu choice and numeric input by pressing this
button.
Selecting/canceling options
To access any of the primary keypad options (
SET TEMP
,
CAL TEMP
and
MENU
), press the appropriate keypad button once. If you make a
data entry error and wish to cancel your input sequence, press the pri-
mary keypad option button again.
NOTE
If the keypad does not receive user input for five minutes after a primary
option is selected, the instrument will return to the LCD temperature
display screen without saving any changes.
Initial options
Only three keypad options are enabled when the Cold Start routine is
begun—SET TEMP, CAL TEMP and MENU:
„
SET TEMP
allows user to type in the desired bath temperature
setting. See details below.
„
CAL TEMP allows user to recalibrate the temperature sensing
mechanism. See Calibrating the CT-2000 , page 17).