Cannon CAWDFS12 Скачать руководство пользователя страница 13

Страница: 13 / 16

CARE AND MAINTENANCE

Model No – CAWDFS12

Page 12

MAINTENANCE

At the beginning of each winter season, you should check the following to ensure proper running

of your heater. Any worn or cracked parts should be replaced immediately using replacement parts

specified by the manufacturer.

• Door glass

• Door handle and locking mechanism

• Door hinge

• Fire bricks

• Door sealant

• Fan

You should also check that moving parts such as the door handle and air slide work correctly.

If there is any stiffness in these parts, apply lubricant rated for high temperature applications as

recommended by the manufacturer.

Any service requests resulting from incorrect installations are not covered by our warranty terms

and conditions. These calls will result in charges, usually to the end user, so please ensure

that the installation and commissioning has been satisfactorily carried out before calling for any

warranty service.

Содержание CAWDFS12

















Результаты поиска

Содержание CAWDFS12

Отзывы:

Похожие инструкции для CAWDFS12

Бренды по названию

Популярные бренды

Cannon CAWDFS12, Инструкции по использованию, уходу и установке

Результаты поиска

Содержание CAWDFS12

Отзывы:

Похожие инструкции для CAWDFS12

Бренды по названию

Популярные бренды