Enter 64 End
*/$%ENTR* *ZEND*
5. General Setting
5: General Configuration Setting
5-3-4 STX Character
Set Stx digits
*74L+*
Configuration Length
Default Setting
1
0x02
5-3-5 Setup Time
Set when after enter into setting mode, it is Timeout if there is no action within a
period of time.
*75B+*
Procedure:
(A) Scan “Enter” barcode
(B) Scan “STX Character” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
Configuration Range
Unit
Default Setting
1~255 Sec
1 Sec
60 Sec
Procedure:
Example:
(A) Scan “Enter” barcode
(B) Scan “Setup Time” barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 2 minutes, the
parameter value is 2
min / 1 sec =
120
5-3-4 STX Character
5-3-5 Setup Time