1.
Open the
porthole
Use the fl at
screwdriver for
leverage, and
remove the
external clamp
3.
Once the clamp
is removed,
detach the fl ap
from the gasket,
to allow access to
the inside of the
product
4.
By using Torx
wrench, remove
the fi xing screws
of the door lock
2.
1.
Open the
porthole
Once the clamp
is removed,
detach the fl ap
from the gasket,
to allow access to
the inside of the
product
3.
Use the fl at
screwdriver for
leverage, and
remove the
external clamp
2.
4.
By using Torx
wrench, remove
the fi xing screws
of the door lock,
and press its
buckle.
Disconnect the
wiring, in case
of “faston”, pay
attention to do
not invert the
wiring
6.
Remove the
door lock
5.
5.
Disassemble
the work top
and trims
6.
Disassemble
the
dispenser
and bezel
7.
Remove
the door
lock
8.
Remove the
water protection
9.
Replace the door
lock by paying
attention to
mechanical linkage
of emergency
opening and
electrical
connections
DOOR LOCK
TYPE 2
TOOLS: CROSS-HEADED SCREWDRIVER, TONG, FLAT SCREWDRIVER
DOOR LOCK
TYPE 1
TOOLS: CROSS-HEADED SCREWDRIVER, TONG, FLAT SCREWDRIVER
DOOR LOCK
INSTRUCTIONS