manualshive.com logo in svg

Candy GO 714, Инструкция пользователя, Страница: 18 / 20

Поделиться
Скачать
Candy GO 714 Скачать руководство пользователя страница 18

34

35

G

PT

BOTÃO DE INÍCIO DE
FUNCIONAMENTO RETARDADO

Esta opção pode ser obtida
pelo botão de início de
funcionamento retardado,
atrasando o início de lavagem
3, 6 ou 9 horas.
Para atrasar o início de
funcionamento, proceda da
seguinte forma:
Seleccione o programa (“STOP”
– indicador luminoso);
Pressione o botão de início de
funcionamento retardado
(cada vez que pressionar o
botão, o início atrasará 3, 6 ou 9
horas respectivamente e a luz
correspondente irá piscar).
Pressione o botão “START” para
dar início à operação de início
de funcionamento retardado
(o indicador luminoso
associado a essa função,
deixará de piscar e
permanecerá  na função “ON”.
No fim do tempo de atraso
seleccionado, o programa
iniciar-se-á.

Para cancelar a função Início
de Funcionamento Retardado:
Pressione o respectivo botão
dessa função até o indicador
luminoso se desligar, nessa
altura o programa poderá
iniciar-se manualmente,
utilizando  o botão “START” ou
rodando o selector de
programas para a posição
“OFF”.

PL

PRZYCISK “ OPÓèNIONY START”

Przycisk ten pozwala
zaprogramowaç w∏aczenie
cyklu prania za 3, 6 lub 9
godzin. Aby w∏àczyç
“opóêniony start” nale˝y:
Ustawiç wybrany program
(kontrolka STOP zacznie
migaç) Wcisnàç przycisk
OPÓèNIONY START. Ka˝de
wciÊni´cie powoduje
wybranie czasu rozpocz´cia
odpowiednio za  3, 6 lub 9
godzin. (Kontrolka
odpowiadajàca wybranemu
czasowi zacznie migaç.)
Wcisnàç przycisk START aby
rozpoczàç odliczanie czasu
pozosta∏ego  do
automatycznego w∏àczenia
si´ cyklu prania w
zaprogramowanym czasie.
(kontrolka odpowiadajàca
wybranemu czasowi
pozostanie zapalona)

Mo˝liwe jest  anulowanie
ustawienia opóênionego
startu w nast´pujacy sposób:
Wcisnàç kilkakrotnie przycisk
OPÓèNIONY START aby
zgasiç kontrolki (na
potwierdzenie, ˝e opóêniony
start jest anulowany
kontrolka STOP zacznie
migaç).
W tym momencie jest
mo˝liwe rozpocz´cie  cyklu
wybranego poprzednio,
poprzez wciÊniecie przycisku
START albo anulowanie cyklu
poprzez ustawienie pokr´t∏à
programatora na pozycj´
OFF i nastepnie wybranie
innego programu.

START DELAY BUTTON

Appliance start time can be
set with this button, delaying
the star by 3, 6 or 9 hours.
Proceed as follow to set a
delayed start:
Select a programme
(“STOP” indicator light blinks)
Press Start Delay button
(each time the button is
pressed the start will be
delayed by 3, 6 or 9 hours
respectively and the
corresponding light will
blink).
Press START to commence
the Start Delay operation
(the indicator light
associated with the
selected Start Delay time
stops blinking and remains
ON).
At the end of the required
time delay the programme
will start.

To cancel the Start Delay
function :
press the Start Delay  button
until the indicator lights will
be off (The STOP light  blinks)
and the programme can be
started manually using the
START button or switch off
the appliance by turning the
programme selector to off
position.

EN

TLAâÍTKO ODLOÎENÉHO

STARTU

Pomocí tohoto tlaãítka je
moÏné naprogramovat spu‰tûní
pracího cyklu se zpoÏdûním o
3, 6 nebo 9 hodin.
Pro nastavení odloÏeného startu
postupujte následujícím
zpÛsobem: Nastavte zvolen˘
program (kontrolka STOP zaãne
blikat) Stisknûte tlaãítko
ODLOÎEN¯ START (pfii kaÏdém
stisknutí se mÛÏe zadat start
odloÏen˘  o 3,  6 nebo  9 hodin
a kontrolka, která pfiíslu‰í
zvolenému ãasu zaãne blikat)
Stisknûte tlaãítko START
(kontrolka pfiíslu‰ející zvolenému
ãasu zÛstane svítit), tím zaãne
odpoãítávání, na jehoÏ konci se
program automaticky spustí.

Nastavení  odloÏeného startu je
moÏné zru‰it následujícím
zpÛsobem: opakovanû
stisknûte tlaãítko ODLOÎEN¯
START, aby zhasly kontrolky (na
potvrzení, Ïe odloÏen˘ start byl
zru‰en, zaãne blikat  kontrolka
STOP) . V tomto okamÏiku je
moÏné spustit dfiíve zvolen˘
program stisknutím tlaãítka
START nebo zru‰it   nastavení
programu tak, Ïe otoãíte voliã
programÛ do polohy  OFF, pak
mÛÏete zvolit jin˘ program.

CZ

TLAâIDLO ODLOÎENÉHO
·TARTU

Pomocou tohto tlaãidla je moÏné
naprogramovaÈ spustenie
pracieho cyklu s oneskorením
o 3, 6 alebo 9 hodín.
Pre nastavenie odloÏeného
‰tartu postupujte nasledujúcim
spôsobom: Nastavte zvolen˘
program (kontrolka STOP zaãne
blikaÈ) Stlaãte tlaãidlo
ODLOÎEN¯ ·TART (pri kaÏdom
stlaãení sa môÏe zadaÈ
‰tart odloÏen˘ o 3, 6 alebo 9
hodín a kontrolka, ktorá
prislúcha zvolenému ãasu zaãne
blikaÈ) Stlaãte tlaãidlo ·TART
(kontrolka prislúchajúca
zvolenému ãasu zostane svietiÈ),
t˘m zaãne odpoãítavanie,
na ktorého konci sa program
automaticky spustí.
Nastavenie odloÏeného ‰tartu je
moÏné zru‰iÈ nasledujúcim
spôsobom: opakovane stlaãte
tlaãidlo ODLOÎEN¯ ·TART, aby
zhasli kontrolky (na potvrdenie,
Ïe odloÏen˘ ‰tart bol zru‰en˘,
zaãne blikaÈ kontrolka STOP) . V
tomto okamihu je moÏné spustiÈ
skôr zvolen˘ program stlaãením
tlaãidla ·TART alebo zru‰iÈ
nastavenie programu tak, Ïe
otoãíte voliã programov do
polohy OFF, potom môÏete
zvoliÈ in˘ program.

SK

mikosoft praha s.r.o.

mikosoft praha s.r.o.

mikosoft praha s.r.o.

mikosoft praha s.r.o.

Содержание GO 714





















Отзывы:

Нет отзывов