having the earth contact connected and in operation. The earth
conductor is yellow-green in colour. This operation should be carried
out by a suitably qualified professional. In case of incompatibility
between the socket and the appliance plug, ask a qualified electrician to
substitute the socket with another suitable type. The plug and the
socket must be conformed to the current norms of the installation
country. Connection to the power source can also be made by placing
an omnipolar breaker between the appliance and the power source
that can bear the maximum connected load and that is in line with
current legislation. The yellow-green earth cable should not be
interrupted by the breaker. The socket or omnipolar breaker used for
the connection should be easily accessible when the appliance is
installed.
•
The disconnection may be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring in accordance with the
wiring rules.
•
If the power cable is damaged, it must be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department.
•
The type of power cable must be H05V2V2-F.
•
Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
•
Any excess of spilled material should be removed before cleaning.
•
During the pyrolytic cleaning process, surfaces can heat up more than
usual, children must therefore be kept at a safe distance.
•
The appliance must not be installed behind a decorative door in order
to avoid overheating.
•
When you place the shelf inside, make sure that the stop is directed
upwards and in the back of the cavity.
•
The shelf must be inserted completely into the cavity
.
•WARNING: Do not line the oven walls with aluminum foil or single-use
protection available from stores. Aluminum foil or any other protection,
in direct contact with the hot enamel, risk melting and deteriorating the
enamel of the insides.
•WARNING: Never remove the oven door seal.
EN 03
