Candy CRE H10A2DE-S, Руководство пользователя

Страница: 61 / 140

61
EN

Do not install the product in a
low temperature room or in a
room where there is a risk of
frost occurring. At temperature
around freezing point the
product may not be able to
operate properly: there is a risk
of damage if the water is
allowed to freeze in the
hydraulic circuit (valves, hoses,
pumps). For a better product
performance the ambient room
temperature must be between
5-35°C. Please note that
operating in cold condition
(b2 and +5°C) might
simply some water condensation
and water drops on floor.

In cases where the dryer is
installed on top of a washing
machine, a suitable stacking kit
must be used according to the
configuration of your appliance:
- Stacking kit "standard size": for
washing machine with
minimum depth of 44 cm;
- Stacking kit "slim size": for
washing machine with
minimum depth of 40 cm.
- Universal stacking kit with
sliding: for washing machine
with minimum depth of
47 cm.
The stacking kit shall be
obtainable from service. The
instructions for installation and
any fixing attachments, are
provided with the stacking kit.

NEVER install the dryer up
near curtains.

The appliance must not be
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer, in
such way that a full opening of
the tumble dryer door is restricted.

For your safety, the appliance
must be correctly installed. If
there is any doubt about installation,
call Service for advice.

Once the machine is in place
the feet should be adjusted to
ensure that the machine is
level.

The technical details (supply
voltage and power input) are
indicated on the product rating
plate.
Electrical connections and
safety instructions
Installation