EN-2
7
The power supply should be connected in compliance with the relevant standard,
or a single-pole circuit breaker. The method of connection is shown below.
•
If the cable is damaged or to be replaced, the operation must be carried out the
by after-sale agent with dedicated tools to avoid any accidents.
•
If the appliance is being connected directly to the mains an omnipolar
circuit-breaker must be installed with a minimum opening of 3mm between
contacts.
•
The installer must ensure that the correct electrical connection has been made
and that it is compliant with safety regulations.
•
The cable must not be bent or compressed.
•
The cable must be checked regularly and replaced by authorised technicians
only.
This appliance is labelled in accordance with European Directive 2012/19/EU
regarding electric and electronic appliances (WEEE). The WEEE contain both
polluting substances (that can have a negative effect on the environment) and
base elements (that can be reused). It is important that the WEEE undergo
specific treatments to correctly remove and dispose of the pollutants and
recover all the materials. Individuals can play an important role in ensuring
that the WEEE do not become an environmental problem; It is essential to
follow a few basic rules:
-the WEEE should not be treated as domestic waste;
-the WEEE should be taken to dedicated collection areas managed by the town council or a
registered company.
In many countries, domestic collections may be available for large WEEEs. When you buy a
new appliance, the old one can be returned to the vendor who must accept it free of charge as
a one-off, as long as the appliance is of an equivalent type and has the same functions as the
purchased appliance.
220-240V~
Black
Brown
Grey
Blue
Yellow/Green
Input
Power Cord
L
N
220-240V~
220-240V~
400V~
Black
Brown
Grey
Blue
Yellow/Green
Input
Power Cord
L1 L2
N
Input
Power Cord
220-240V~
Black
Brown
Grey
Blue
Yellow/Green
220-240V~
L1 L2 N1 N2
Input
Power Cord
400V~
Black
Brown
Grey
Blue
Yellow/Green
L1
L2
