9
Warning!
When changing the side at which the door opens, the appliance must not be connected to the
mains. Remove plug from the mains beforehand.
Starting up and temperature regulation
Insert the plug of the connection lead into the plug socket with protective earth contact. When
the refrigerator compartment door is opened, the internal lighting is switched on.
The temperature selector knob is located on the right of the refrigerator compartment.
Setting 0 means:
Off.
Turning clockwise in direction Refrigerating unit on, the latter then operating automatically.
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Important!
Normally we advise you select setting of 2 or 3 or 4, if you want the temperature
warmer or colder please turn the knob to lower or higher setting accordingly.
When you turn the knob to lower which can lead to the more energy efficiency.
Otherwise, it would result the energy-consuming.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on the temperature
regulator (position 6 to 7) can cause the compressor to run continuously or even non-stop!
Reason: when the ambient temperature is high, the compressor must run continuously to
maintain the low temperature in the appliance.
Interior accessories
Storage shelves/wire tray
Various glass or plastic storage shelves or wire trays are included with your appliance -
different models have different combinations and different models have different quality..
You should always slide one of the full size glass storage shelves into the lowest set of
