12
Important!
Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice from
orange peel, butyric acid, cleanser that contain acetic acid.
Do not allow such substances to come into contact with appliance parts.
Do not use any abrasive cleansers.
Remove the food from the refrigerator. Store it in a cool place, well covered.
Switch the appliance off and remove the plug from the mains, or switch off or turn out the
circuit breaker or fuse.
Clean the appliance and the interior accessories with a cloth and lukewarm water.
Commercially available dish washing detergents may also be used.
After cleaning wipe with fresh water and rub dry.
Accumulation of dust at the condenser increases energy consumption.
For this reason carefully clean the condenser at the back of the appliance once a year with a
soft brush or a vacuum cleaner.
Check the water drain hole on the rear wall of the refrigerator compartment.
Clear a blocked drain hole with the aid of something like soft green peg, be careful not to
make any damage to the cabinet by sharp things.
After everything is dry place appliance back into service.
Energy Saving tips
1. Do not place warm foods into the appliance. Allow warm foods to cool first. Do not
install the appliance near cookers, radiators or other sources of warmth. High ambient
temperatures cause longer, more frequent operation of the compressor
2. In order to make the cooling system work efficiently, please make sure the side plates
and back plate of the product are with some distance from the wall. It is strongly
recommended that its back is 75mm away from the wall, its sides at least
have a space of 100mm separately and the height from over its top is not
less than 100mm.
3. When the product works, please do not open the door too often or leave the door open
any longer than necessary.
4. Do not set temperature any colder than necessary.
5. The direct cooling refrigerator (with a freezer) needs to be defrosted when necessary.
This will improve the cold transfer and reduce energy consumption.
6. The sketch map shows the right combination of the drawers, crisper and shelves
which can lead to the more energy efficiency. If users adjust the combination, it would
result in the energy-consuming.
7. Store food logically. Do not exceed the storage period specified.
Trouble shooting
Correcting Malfunctions
