30
CHANGING THE FLEXIBLE GAS HOSE
In order to guarantee that the gas hose is always in
excellent condition we strongly recommend changing
it on the date you will find printed on it.
REPLACING THE ELECTRICAL COMPONENTS
• The rear protection will have to be removed in order
to change the electrical heating elements, spit
motor, terminal board and power cable.
•
If you have to change the power cable (see the
cross section on table
paragraph «
TECHNICAL
FEATURES
»)
, always keep the earth wire longer
than the phase wires and, in addition, follow
all the instructions given in the «ELECTRICAL
CONNECTION» paragraph.
• To change the oven lamp see the instructions on
the
REPLACING THE OVEN LAMP paragraph
.
•
To change the lamp holder
, remove the side
panels and then use a screwdriver to push the two
locking tabs (fig. 24) and remove the lamp holder
from the inside of the oven.
• To change the eventual programming accessory,
the thermostat, the commutator and the indicator
lights, remove the front panel as indicated in
paragraph
«TAPS»
INSTRUCTIONS FOR THE INSTALLER
�
�
24
Содержание CCV9D52X
Страница 1: ...INSTRUCTIONS AND ADVICE FOR INSTALLING USING AND SERVICING OF COOKERS 461308194_001 03 2013 gb ...
Страница 31: ...31 ...
Страница 32: ...SPACE FOR DATA LABEL 461308194_001 07 2013 ...