Candy CCBS6182WHV/1, Инструкция по эксплуатации и техническому обслуживанию

Страница: 27 / 35

d) Kindly advice the user to move the
buttnm C, setting temperature w
der super freezing mode , you can’t change setting
freezing mode can be activated. LED in the left will be
apply super freezing mode.
1) Enter into super freezing mode
freezing fuction for 24 hours.
In order to get max freezing capacity, please put
fresh foot into freezer compartment after starting super
:LWK'LJLWDO([WHUQDO8VHULQWHUIDFH
5. Super freezing
When you want to freeze food in a short time, you can
Constantly press Key C for over 3 seconds, super
switched on.
2) Quit from Super Freezing mode
Quit from Super Freezing mode by below conditions:
x Press key C for over 3 seconds to choose other
setting.
x Running time of Super Freezing mode is more than 50
hours.
3) After exit super freezing mode, the appliance will run
with same setting before you start super freezing mode.
The left LED light will be switched off.
4) Un
temperature of fridge compartment by pressing button C.
when you try to do so, the left LED light will flickering for
3 seconds to remind you of wrong operation.
6. Temperature setting of Fridge Compartment
Under non-supper freezing mode, repeatedly press
ill be changed in a circle
of “2 ćˈ
3
ćˈ
4
ćˈ
6
ćˈ
8
ć ”. If you press one time, the
temperature is changed once; the number under which
LED is lighted on is the setting temperature.
Useful hints:
Please follow the below table to choose setting
temperature of fridges.
Ambient
Temperature
Recommended
Temperature
Summer (>32
ć
) 4
ćˈ
6
ćˈ
8
ć
Normal 4
ć
Winter(<13
ć
) 2
ć
, 3
ć
, 4
ć
7 . Memory function after Power off
The settings at the moment that power is off will be
remembered, appliance will automatically re-start to run
with setting of the moment that power is off when the
power supply is restored.
8. Delay protection function
The appliance has a function that delay to start
compressor resulting in protecting compressor, once
compressor is stopped, the time from this stop of
compressor to next start of compressor must be at least
5 minutes.
9. Troubleshooting tips
1). If temperature sensor of fridge compartment is flawed,
LED light under number 2 will be flickering continuously.
2). Defrost sensor is flawed, LED Light under number 3
will be flickering continuously.
3).
Ambient temperature sensor flawed, light under
number 4 will be flickering continuously.
4). If communication between user interface and
mainboard is flawed, all lights in display will be flickering
continuously.
10. Temperature Control of Freezer Compartment
1). freezer temperature setting knob:
2). set freezer temperature
The freezer temperature can be adjusted by changing
the knob to change the air distribution between freezer
and fridge.
3). the freezer temperature adjustment
a) Freezer compartment temperature can be adjusted by
the know, the temperature rises gradually when the knob
is moved from left to right
b)
When knob is moved to right end, air flow from freezer
to fridge will increase to max level; the temperature of
freezer will increase. Kindly recommend that this mode
only is used when freezer is empty or rarely food is
preserved in freezer compartment.
c) When knob is move to left end, air flow from freezer to
fridge will decrease to min level, the temperature of
freezer will decrease. Kindly recommend that this mode
is only used when mounts of food is stored in freezer
compartment. The lasting time is no more than 8 hours.
temperature knob
into the middle position at normal conditions, however,
user can also adjust the temperature range according to
the food storage situation.
11
EN24
second, and the appliance will run with same setting
(mode and temperature) as last time the appliance was
set. If it is switched on first time, it runs with default
setting.
10