Before sliding the airbag under the dock, do not forget to connect the hose
supplied with the airbag, to ensure that water do not enter into the airbag
during the operation. Connect the other end of the hose to the Dock Box.
Attach a rope to the airbag on the
opposite side of the hose, and slide it under
your Candock dock between stabilizer bars.
Then slowly pull the rope until you see the
airbag. To ensure you do not pull the airbag
too much, put the side straps around the rods
that hold the stabilizer bars.
Once the airbag is in place,
put the straps on the other side of
the
Candock
dock
without
tightening the side straps. Also
place
the
center
straps
by
inserting them in the white bolt.
Use the front strap of the airbag
and the 4 remaining straps to
secure the hose along the dock by
passing the strap around the pipe
and into the white bolts.