Cando C-Pro, Руководство пользователя

Страница: 27 / 34

CanDo C-Pro Diagnostic Tablet
27
standard operating positions accepted by the FCC with the C-Pro
transmitting at its highest certified power level in all tested frequency bands,
although the SAR is determined at the highest certified power level, the actual
SAR level of the phone. While operating can be well below the maximum value,
in general, the closer you are to a Wireless base station antenna, the lower the
power output. Before a new model phone is a available for sale to the public, it
must be tested and certified to the FCC that it does not exceed the exposure
limit established by the FCC, Tests for each phone are performed in positions
and locations (e.g. at the ear and worn on the body)as required by the FCC.
For body worn operation, this model C-Pro has been tested and meets the
FCC RF exposure. Guidelines when used with an accessory designated for this
product or when used with an accessory that Contains no metal and that
positions the handset a minimum of 1 cm from the body.
Non-compliance with the above restrictions may result in violation of RF
exposure guidelines.
Annex: Diagnostic Interface Definition and Description of Standard OBD-II
1. OBD-II General Introduction
OBD-II is the abbreviated name of ON-BOARD DIAGNOSTICS-II.The first
generation of diagnostic system is before 1993, and the diagnostic socket, fault
codes, diagnostic function of each manufacturer was all different, which caused
difficulties for repair personnel. American Society of Automotive Engineers
(SAE) developed a set of standards and this set of standards certified by the
"Environmental Protection Agency" (EPA) and "California Resources