C&K systems Sierra, Руководство пользователя

Страница: 23 / 68

3
Arm/Bypass
19
When your system is armed
with full arming, both the perim-
eter and interior zones are
armed. You are allowed a spe-
cific time to enter or exit the
building before an alarm
sounds. See Section 8 for the
entry and exit delay settings
programmed into your system.
Quick Full-Arming.
If your system is pro-
grammed for quick full-
arming, you do not need
to enter a user code.
To Arm the System
with Full Arming:
1. Make sure the Ready LED is
lit. Enter your user code.
Exit and secure the building.
To Arm the System with
Quick Full-Arming:
1. Press and hold the
[quick exit] key for 2 seconds
until you hear two beeps.
Exit the building.
Interior armed _X_
Perimeter armed _X_
Exit allowed _X_
Requires user code _X_
Automatically arms ___
No entry allowed ___
Exit Delay
An exit delay is the amount of time you have to exit and secure
the building, once your security system begins to arm. These
delays last from 20 to 255 seconds, depending upon how your
system was programmed.
During the exit delay, the Arm LED blinks. The keypad may beep;
if so, it beeps faster during the last ten seconds. If any zones are
faulted (not ready to be armed), the corresponding zone LED lights
and the Ready LED is off.
Full
Arming