N Series Floor Ceiling Type Unit
29
4) When drain hose requires extension, obtain an extension hose
commercially available.
5) After connecting the local drain hose, tape the slits of the heat
insulation tube.
6) Connect the drain hose to the local drain pipe. Position the inter
connecting wire in the same direction as the piping.
3.2.6.2 Connecting the Drain Hose
(1) Connect the extension auxiliary pipe to the local piping.
(2) Prepare the local piping at the connection point for the drain pipe, as
shown in the installation drawings.
NOTICE:
Be sure to place the drain hose as shown in the diagram below, in a
downward sloping direction.
3.2.6.3 Outdoor Side Drain Pipe
(1) If the out door unit i s und erneath t he i ndoor uni t, ar range t he pi peline
according to the following diagram.
1) Drain hose should be placed on the ground and its end should not be
immersed into water. The whole pipeline should be supported and
fixed onto the wall.
2) Wind the insulating tape from bottom to top.
