Candela Corporation
M
GentleLASE PLUS
Installation Procedure
8503-01-0821, Revision A
Candela Corporation Proprietary
Page 3 of 8
WARNING
FOLLOW THE INSTALLAT ION STEPS IN SEQUENCE TO ELIMINATE
ANY POSSIBLE DAMAGE TO THE SYSTEM.
Equipment Needed:
•
Adjustable Wrench
•
2.5 Liters of Distilled Water
Laser System Unpacking
1.
Using the adjustable wrench, remove the front of the crate. Keep the front nearby
to use as a ramp to roll the laser system from the crate.
2.
Remove the accessories located on each side of the laser system from the crate.
3.
Place one end of the front of the crate on the floor. Butt the other end against the
floor of the crate. Grasp each handle and gently roll the laser out of the crate.
WARNING:
Rear wheels must be
locked when removing laser from
crate. Failure to have rear wheels
locked could result in the laser
coming off the ramp.
4.
Move the laser to the room that has been prepared for its use. Make sure the
required space and electrical requirements are met. To prevent the laser system
from moving inadvertently, lock each front wheel.
Rear wheels locked
