Candela C-8 2023, Руководство пользователя

Страница: 42 / 55

82 83
Maintenance Maintenance
Checking the anodes
The anode is consumed when only 50% of the material remains. If it is not replaced in time, the
boat may suffer corrosion damages.
A
B
C
B
A
2x
2x
B
A
Replacing the aft anode pair
Annually or as often as necessary:
1. Loosen the nut of the anode. Use a socket wrench 19mm / 0.75in.
2. Check the condition of the screw and nut. If necessary, replace them.
3. Replace the anode.
4. Be sure to tighten the screw and nut properly.
5. Repeat the procedure on the second aft anode.
A.
Aft anodes
B.
Front anodes
C.
Propeller anodes (inside propeller)
Replacing the front foil anode pair
NOTICE!
Risk of foil damage.
• Be careful not to drop the foil when loosening the screws.
• Be careful not to mix up the different screws. Using the wrong screw can seriously
damage the front foil.
The front foil weighs about 5kg (11lbs) . When the screws are loosened, the foil will drop to the
ground if not supported. Ensure the foil is supported.
1. Loosen the screws of the first anode while supporting the front foil. Use Allen key 6, 5 and
4mm ( 0.24, 0.2, and 0.16in). Note the position and corresponding type of screw(s).
2. Loosen the screws of the second anode. The front foil will become loose. Note the position
and corresponding type of screw(s).
3. Check the condition of the screws. If necessary, replace them.
4. Replace the anodes and fasten the front foil. Make sure to replace the screws in the correct
position.
5. Be sure to tighten the screws of both anodes properly.
Replacing the propeller anodes
Replace the propeller anodes annually or when needed. The replacement should be made by an
authorized Candela workshop.
Checking for any corrosion, damages, or wear
Check all brass and stainless-steel metal parts annually. If any replacements are necessary, or if
you are uncertain whether the damage needs repairing, contact Candela.