28
29
5/8" hole in brine
well cap
Res-up feeder
1/4” Holes
AUTOMATIC RESIN CLEANER SOLUTION FEEDER INSTALLATION
Optional Res-Up feeders are devices that attach to your brine tank and automatically dispense the Res-Up
cleaner into the brine solution where it cleans the resin during the regeneration cycle.
The feeder hooks onto the inside of your brine tank and feeds the cleaning solution into your brine well.
You MUST maintain the level of cleaner in the feeder for proper operation. A Res-Up feeder is essential if
your raw water contains measurable amounts of Iron.
2.
Mark the location of the
holder and drill.
1.
Measure 2 inches from the
top of the tank beside the
oblong molding.
3.
Install the holder.
5.
Take off the small hole cover on
the Brine Well lid.
4.
Hang the Res Care bottle on
the hanger.
6.
Take off the cover of the Res Care bottle. Insert the wick,
making sure it touches the bottom of the bottle. Insert the
other end of the tube completely into the hole in the brine
well cap. Automatic feeding will start in a few hours.
SYSTEM MAINTENANCE
(CONTINUED)
RES-UP® FEEDER INSTALLATION INSTRUCTIONS
ROUND BRINE TANK
RES-UP® FEEDER INSTALLATION
INSTRUCTIONS SQUARE BRINE TANK
1.
Install the grid and brine well
inside the square tank.
3.
Mark the location of the holder
and drill.
2.
Measure 2 inches from the top
of the tank beside the oblong
molding.
4.
IInstall the holder and the
Res Care Solution