24
Size Ft
3
Color
75
#1 WHITE
100
#1 WHITE
150
#1 WHITE
200
#2 BLUE
250
#2 BLUE
300
#3 YELLOW
IMPORTANT
The injector cage must
be lined up and
inserted properly to
avoid crushing when
the injector cap is
re-installed. Markings
on the cage and valve
body must line up.
Upflow Injector Configuration
Injectors
85UF Valve
After
June 2022
Upflow Injector Configuration
Injectors
Plug
85UF Valve
Before
June 2022
Failure to make these changes will result in
unsatisfactory operation of this equipment
and void any implied performance warranty.
PROBLEM WATER INJECTOR KIT
For use on upflow softeners only.
IMPORTANT!:
If the water source this water softener is being applied on is not municipal water and contains up to 2.0 mg/l/ppm of ferrous (Clear
Water) iron and/or up to .75 mg/l/ppm of manganese, the enclosed Problem Water Injector Kit needs to be installed into the control valve following
these instructions.
FAILURE TO DO THIS WILL RESULT IN UNSATISFACTORY OPERATION OF THIS EQUIPMENT AND VOID ANY IMPLIED PERFORMANCE
WARRANTY.
NOTICE
Do NOT over tighten injectors. Snug-tight only.
Replace injectors with correct number and color corresponding to your equipment size.
*NOTE
: Remember to properly lubricate ALL O-Rings with the silicone lubricant supplied.
START-UP INSTRUCTIONS
(CONTINUED)
Содержание 85UF
Страница 2: ......
