Section 2 ‒ Operation and Installation
12
MLMux4 User's Guide
2.6 MLWebHardware Configuration
To configure MLWebHardware to use the MLMux4 navigate to the Configure Multiplexer form of the device
containing the MLMux4 to be configured and
Add
a new Multiplexer.
See the
MLWebHardware Users Guide
for details on access MLWebHardware and configuring new device
programs.
1. Select
CAN MLMux4
as the Mux Type on the
Multiplexer
form.
2. Select either
4 (4wires)
or
8 (2 wires)
from the Channels dropdown. This should match the switch settings of the
MLMux4.
3. Be sure to match the
Enable
and
Clock
settings of the form with the physical wiring.
4.
Save
the new Multiplexer.
Channels are then configured by pressing the
Configure Channels
button. See the
MLWebHardware Users
Guide
or the MLRemote Users guide for details on channel configuration.
