Section 2 ‒ Operation and Installation
10
MLMux4 User's Guide
2.4 Controller Connections
The MLMux4 is connected to the controller using the common terminals at the top of the device.
The table below lists typical connections:
MLMux4 4-
Channel
MLMux4 8-
Channel
Description
H1
H1
High side of CH1
L1
L1
Low side of CH1
H2
Not Used
High side of CH2
L2
Not Used
Low side of CH2
S
S
Cable Shield
PWR
PWR
12V Power
GND
GND
Ground
EN
EN
Enable
CLK
CLK
Clock
The figure below shows an MLMux4 wired to an MLRemote using the four-channel mode using an MLMux4
harness. The MLMux4 harness includes nine multi colored wires that are precut and zip tied to fit the MLRemote /
MLMux4 connection. By default, the MLMux4 ships in 4-channel mode.
