IMPORTANT SAFETY INSTRUCTIONS
GSF SERIES
GALVANIZED SHUTTER FAN - COMPLETE WITH CORD AND PLUG AND PULL CHAIN SWITCH
GSF-M-04_08_22
Page 3 of 11
Fans are UL/CUL Listed, Standard 507.
1.
Do not depend on any switch as the sole means of disconnecting power when installing or
servicing the fan.
2.
Always disconnect, lock-out, and tag-out power source before installing or servicing. Failure to
disconnect power source can result in fire, shock, or serious injury.
3.
Motor will restart without warning after thermal protector trips. Do not touch operating motor; it
may be hot enough to cause injury.
4.
Do not place body parts or objects in fan or motor openings while motor is connected to the power
source.
5.
All electrical connections should be made by a qualified electrician.
6.
CAUTION - For General Ventilating Use Only. Do Not Use To Exhaust Hazardous Or Explosive
Materials And Vapors.
7.
Follow all local and state/provincial electrical and safety codes in the United States and Canada,
as well as the National Electrical Code (NEC) and the Occupational Safety and Health Act
(OSHA) in the United States, and the Canadian Electric Code (CEC) in Canada.
8.
Always disconnect power source before working on or near a motor or its connected load.
9.
Protect the power cable from coming in contact with sharp objects.
10. Do not kink or create tight bends in the power cable and never allow the cable to come in contact
with oil, grease, hot surfaces, or chemicals.
11. Make certain that the power source conforms to the requirements of your specific exhaust fan
model. The fan frame and motor must be electrically grounded to a suitable electrical ground,
such as a grounded water pipe or ground wire system.
12. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized
service facility for examination and/or repair.
13. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture
or appliances. Arrange cord away from traffic area and similar danger locations.
14. The discharge air is to be directed to the building exterior.
Thermal Protection.
INSTALL IN INTERIOR WALL.
CAUTION -
MOUNT WITH THE LOWEST MOVING PARTS AT LEAST 2.5 m (8.2 ft)
ABOVE FLOOR OR GRADE LEVEL.
CAUTION:
HOT SURFACE. AVOID CONTACT.
WARNING -
For indoor use only.
WARNING -
To reduce the risk of electric shock, do not expose to water or rain.
WARNING -
To reduce the risk of fire or electric shock, do not use this fan with any
solid-state speed control device.
Suitable for commercial or industrial use only.
