GSF SERIES
GALVANIZED SHUTTER FAN - COMPLETE WITH CORD AND PLUG AND PULL CHAIN SWITCH
GSF-M-04_08_22
Page 2 of 11
USER MANUAL
PLEASE READ AND SAVE THESE INSTRUCTIONS
PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO
ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF
AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN
INSTRUCTIONS FOR FUTURE REFERENCE.
BEFORE YOU BEGIN
WARNING!
Installation, trouble shooting, and replacement of parts are to be performed only by
authorized service technicians.
Electrical Requirements:
• The motor amperage and voltage ratings must be checked for compatibility to supply
voltage prior to final electrical connection. Please refer to the motor's nameplate label.
• Wiring must conform to local, state, and national codes.
Tools / Materials Needed
（
Not Included
）
:
• Mounting Fasteners (8)
• Sealant or Caulk
• Regular Screwdriver Set
UNPACKING
Contents:
• Shutter Mounted Exhaust Fan
• User Manual
Inspect:
• After unpacking fan, carefully inspect for any damage that may have occurred during
transit. Check for loose, missing, or damaged parts.
• Check all bolts, screws, set-screws, etc. for looseness that may have occurred during
transit. Tighten as needed. Rotate propeller by hand to ensure it turns freely.
• See Important Safety Instructions on page 3, and Cautions and Warnings as shown.
