Canarm BUILDER, Руководство по установке

Страница: 6 / 9

pg. 10
5. MOUNTING FAN ASSEMBLY
INSTALLATION
pg. 9
INSTALLATION
B. CONNECTING BLACK, WHITE & (BLUE OR RED) WIRES
4. ELECTRICAL HOOKUP (CONTINUED)
• connect white wire from outlet box to white wire from fan using marrette (not supplied).
• connect black wire from outlet box to black wire from fan plus (red or blue wire)
using a marrette.
NOTE: A red or blue wire would be power for a light kit if applicable.
NOTE: Once ground wires are connected, carefully tuck wires and marrette into the
metal outlet box making sure that the wires are clear of the hemisphere and downrod
when positioning in the mounting bracket.
• loosen two screws and washers (B) on mounting bracket which correspond
with the slots in the canopy
• remove two screws and washers (A) on the mounting bracket which
correspond with the oblong holes in the canopy.
• position the canopy to the mounting bracket, aligning slots to the screws (B)
then twist to lock
• position and tighten two screws and washers (A) then tighten the two screws (B)
A
B
B
A
white
ground
blue/red
black