PRF36-M - 03/27/08 Page 3 of 3
MAINTENANCE
These fans are used in a variety of applications and therefore maintenance schedules will vary. In general no more than 1/16" of dirt
build-up should occur on blade, motor and guard for proper fan operation and to prevent premature failure. Particular care should be
taken to clean fan blades front and back, and guards for better air moving performance. The motor should be kept clean to prevent
overheating and premature failure. As with all mechanical equipment scheduled inspections should include checking that all hardware
is secure and blade set screws are tight. We suggest as a minimum, that this be performed at the start and twice more every season.
!
WARNING:
MOTORS ARE EQUIPPED WITH AUTOMATIC OVERLOAD PROTECTION AND MAY RESTART WITHOUT
WARNING. ALWAYS DISCONNECT FROM POWER BEFORE ATTEMPTING TO SERVICE.
Moving parts,
disconnect power
before servicing.
WARNING:
DO NOT PRESSURE WASH THE MOTOR. THE MOTOR IS TOTALLY ENCLOSED, BUT IT IS NOT
SEALED.
CANARM LTD.
CANARM LTEE.
ARTHUR MANUFACTURING FACILITY
2157 PARKEDALE AVENUE
2555 RUE BERNARD LEFEBVRE
#7686 CONCESSION 16, RR4
BROCKVILLE, ONTARIO K6V 5V6
LAVAL, QUEBEC H7C 0A5
ARTHUR, ONTARIO N0G 1A0
TELEPHONE: (613) 342-5424
TELEPHONE: (450) 665-2535
TELEPHONE: (519) 848-3910
FAX: 1-800-263-4598
FAX: (450) 665-0910
FAX: (519) 848-3948
E-MAIL: [email protected]
E-MAIL: [email protected]
E-MAIL: [email protected]
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
A) Use this unit only in the manner intended by the manufacturer. If you have questions, contact
the manufacturer.
B) Before servicing or cleaning unit, switch power off at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a prominent warning device, such as a
tag to the service panel.
WARNING:
ALL WIRING SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN FOLLOWING LOCAL CODES
AND REGULATIONS.
