PRF36 Fans
READ INSTRUCTIONS COMPLETELY BEFORE INSTALLATION & SAVE FOR REFERENCE
WARNING:
THE FAN MUST BE MOUNTED TO THE BUILDING
STRUCTURE.
THE STRUCTURE MUST BE SUITABLE TO
SUPPORT THE WEIGHT OF THE FAN.
PRF36-M - 03/27/08 Page 2 of 3
Congratulations on the purchase of this versatile, new
circulating fan.
It mounts to walls, posts or ceilings
and can be pointed in
any direction with the twist of a knob (no tools required!)
(DIAGRAM 1).
This fan provides 12,000 CFM of circulating air flow - good
for any application.
USE & CARE
Fan Controls:
WARNING:
THE HARDWARE FOR MOUNTING TO JOIST OR
BEAM IS NOT SUPPLIED. HARDWARE USED MUST
BE SUITABLE FOR THE TYPE OF JOIST OR BEAM
TO WHICH THE FAN WILL BE MOUNTED.
HARDWARE MUST CORRECTLY FIT THE MOUNTING
HOLES PROVIDED AND SUPPORT THE WEIGHT OF
THE FAN.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID
STATE SPEED CONTROL DEVICE.
WARNING:
FAILURE TO TIGHTEN ALL BOLTS & NUTS
SECURELY COULD RESULT IN SERIOUS INJURY!
MOUNTING THE FAN
Your PRF36 comes with a swivel mount (shown in
DIAGRAM 2), and
should be U-bolted to a post or bolted directly to the ceiling or
ceiling joist. Holes are provided for U-bolts fitting 6X6, 4X4 & 3.5”
round posts.
Knob allows simple directional adjustments
(no tools required!)
Mounts to wall, post or ceiling!
DIAGRAM 1
DIAGRAM 2
TOP (For post/wall mount)
Inside holes could be used for ceiling mount
Various U-bolts
used depending
on mounting pole
3.5” round,
4X4 post,
6X6 post
Slot allows angular
adjustment
Multiple
holes
allowing
several
directional
adjustments
BOTTOM (For post/wall mount)
SWIVEL MOUNT
Nylon locking
nut prevents
loosening
