4 Storage
4 / 18
3.3 Product Nameplate
The nameplate provides a unique identification of the inverter (Product type, Device -specific characteristics,
Certificates and Approvals).
The nameplate is on the left side of the enclosure.
FIG.3-3 Inverter Nameplate (for reference)
4 Storage
The following requirements should be met when the inverters need to be stored:
Do not unpack the inverter.
Storage temperature: –40°C ~ +70°C.
Storage humidity: 0% ~ 100%RH (Non-Condensing).
The stored warehouse should be clean, well-ventilated, and non-corrosive gas, meanwhile it should be in a state of
unimpeded access.
No smoking, no illegal use of electricity and fire.
When storing inverters, do not stack more than the allowed layers to avoid damage, which number marked on the
product packaging.
Regular inspection is required during the storage.
After long periods storage, the inverters need to be inspected and tested by qualified persons before they are put into
use.
