Rev IM/GN-CM-EN/1.0 Copyright© October, 2020 Canadian Solar Inc. 13
ANNEX A: ALTERNATIVE MOUNTING METHODS WITH SINGLE-AXIS TRACKER
Canadian Solar Inc. modules can be mounted on single-axis trackers using center clamps or mounting holes
as described below. All the requirements of the standard module installation manual and specific tracker
detailed installation instructions should apply.
Tracker 1P Clamping method
Overlap support length of
between rail and frame A≥ 730mm
Module type
B Value
Test load(Pa)
Note
6XH-P
300mm
+2400/-2400
Clamp length C
30mm
Please contact the tracker manufacturer and Canadian Solar Inc.’s technical support department for details
in regard to specific projects.
