Barrel Assembly
tel: 888-923-9813 | [email protected]| web: www.leisurecraft.com
Manufactured by:
9
Barrel Assembly
Harmony Barrel Sauna
Assembly Instructions
Repeat the process for the front half moon panels.
Ensure the bench supports are facing inwards.
Continue adding staves on either side of the sauna a
few at a time, alternating sides.
Use the rubber mallet to finesse into place.
Secure every 2
nd
stave on the bottom of the sauna
with the provided nails to hold staves in place.
( If required)
Once past the middle point of sauna, nails should no
longer be needed.
When installing the staves, tap tightly together
while leaving as much of a gap as possible
between stave and wall using the pencil line as a
guide as in picture.
* This will make the tightening of the bands easier.
