O K A N A G A N / S A S K A T O O N / G A N D E R / M U S K O K A S P A S
(9)
TP500 Control Reference Card
Initial Start-up
When your spa is first actuated, it will go into Priming mode, indicated by “ .” Please see the M-7 Installation Instruction Manual
for complete instructions on Power-up and Pump Priming. The Priming mode will last for less than 5 minutes (warm to skip
Priming Mode) and then the spa will begin to heat up and maintain the water temperature in the Standard mode.
Main Menus
Navigation
Navigating the entire menu structure is done with 2 or 3 buttons on the control panel.
Some panels have separate
WARM
(Up) and
COOL
(Down) buttons,
while others have a single
Temperature
button. In the navigation
diagrams Temperature buttons are indicated by a single button icon.
Panels that have two Temperature buttons (Warm and Cool) can use
both of them to simplify navigation and programming where a single
Temperature icon is shown.
The
MENU/SELECT
Button is used to choose the various menus and
navigate each section.
Typical use of the Temperature button(s) allows changing the Set Temperature while the numbers are flashing in the LCD.
The menus can be exited with certain button presses. Simply waiting for a few seconds will return the panel operation to normal.
