SMALL FLOATING HEXAGON INSTRUCTIONS
Canada
Docks
.
ca
TM
Manufactured by: CanadaDocks Inc. 3690 Adjala-Tecumseth Townline RR2 Beeton, ON, Canada L0G 1A0 | 1-877-434-0359 | www.canadadocks.ca
9
11
10
Measure 16” from the previous line and mark with
permanent marker. Do this on both the left and
right side of the prior Joist. Repeat for Truss on the
opposite side of hexagon. Position and centre 2
joists (Q) under these markings.
Measure 16” from center of previous Joist and mark
with permanent marker on the Truss. Do this on both
the left and right side of the prior Joists. Repeat for
Truss on the opposite side of hexagon. Position and
centre 2 joists (S) under these markings.
Using locking pliers to hold in place, line up joists
with the center of the markings. Attach Joists (S)
using #12x¾ Self Drilling Tek Screws (A) and Phillips
#3 Bit (U).
Flip the frame.
7
8
Using locking pliers to hold in place, line up Joists
with the markings at the center. Attach Joists (Q)
using #12x¾” Self Drilling Tek Screws (A) and Phillips
#3 Bit (U).
16”
16”
16”
16”
6
Tie a string to the connecting points of the two
halves to create a straight edge from one side of the
frame to the opposite side. Ensure the string is tight.