32
CAN Srl
–
CU 7000
–
ENGLISH
–
Rev 1/2018
The grill burner is controlled by a gas valve, manually adjustable by the user.
ATTENTION
–
Always wear suitable personal protective equipment
–
Burn danger when the appliance is in use or still hot.
ATTENTION
–
Ignition must take place without any food or saucepans in
the grill compartment
ATTENTION
–
before switching on the grill burner, open the door of the
oven and remove the grill deflector, whose use is compulsory each
time you want to use the grill functionality.
IGNITING THE GRILL BURNER
1)
(Fig. 11-13-16) Fully press the grill burner knob and rotate it to the angle
corresponding to the big flame (90° angle).
2)
At the same time, activate the electrical ignition device by prolonged
pressing on the button positioned on the commands front panel. The
generator will emit a rapid and repeated series of impulses.
3)
After igniting, keep the knob fully pressed for approx. 5 seconds: this release
delay is used to heat the safety thermocouple.
If on release of the knob, the burner does not stay on, it means the
thermocouple was not sufficiently pre-heated. To solve the problem, repeat
operations 1) and 2) and 3) keeping the knob pressed for longer after igniting
the burner.
ATTENTION
–
The appliance must be always under surveillance when in
use
COOKING
5) Wait for a pre-heating period of approx. 5 minutes
6) Open the oven door and equipped with appropriate protection against
scalding, remove the grill and the dripping pan
7) Position any food using suitable saucepans and/or containers for oven use in
metal/ceramic or glass material
8) Re-position the grill or the dripping pan inside the oven
9) Close the door again until it comes in contact with the previously removed
extractable deflector. The oven grill compartment will therefore remain partially
open when the appliance is on.
SWITCHING OFF THE GRILL BURNER
