Can-Am SPYDER RT Series 2020, Оригинальное руководство пользователя

Страница: 151 / 203

147
HOW TRANSPORTING THE VEHICLE
If your vehicle needs to be transported,
it should be carried on a flatbed trailer
of the proper size and capacity.
CAUTION
If you need to push the vehicle, do it
from the right-hand side to be able to
reach the brake pedal.
When pulling the vehicle backwards,
be careful that the front wheel does
not roll over your feet.
NOTICE Do not tow this vehicle
—
towing can seriously damage the ve-
hicle drive system.
When contacting a towing or trans-
porting service, be sure to ask if they
have a flatbed trailer, loading ramp or
power ramp to safely lift the vehicle
and tie-down straps. Ensure the vehi-
cle is properly transported as specified
in this section.
NOTICE Avoid using chains to tie
the vehicle
—
they may damage the
surface finish or plastic components.
To load the vehicle for transport, pro-
ceed as follows:
1. Shift the vehicle into NEUTRAL
(N).
2. Remove the key from the ignition
switch.
3. Put a strap around the lower arm
of each front suspension.
rmo2010-001-097_a
1. Lower suspension arm
2. Strap between shock absorber and fin
NOTICE Do not place the strap over
the fin. This could break it.
4. Attach the straps to the winch
cable. If possible, use chains or
additional straps to attach the
straps to the winch cable as in-
dicated below to avoid damaging
the bumper cover.
rmo2008-001-066_a
TYPICAL
1.
Strap around front suspension lower
arms
2. Chains to avoid damaging the bumper
cover
3. Winch cable
5. Ensure that the parking brake is
released.
6. Pull the vehicle on the flatbed
trailer with the winch.