Can-Am SPYDER RT Series 2020, Оригинальное руководство пользователя

Страница: 174 / 203

170
US EPA EMISSIONS
PERFORMANCE WARRANTY
BRP warrants that if:
1. The Product is maintained and operated in accordance with the written in-
structions for proper maintenance and use, and
2. The Product fails to conform at any time during its useful life to the applica-
ble emission standards or family emission limits as determined by an EPA-
approved emission test, and
3. Such nonconformity results or will result in the Product owner having to bear
any penalty or other sanction (including the denial of the right to use the
Product) under local, State or Federal law, then BRP shall remedy the non-
conformity at no cost to the owner; except that, if the Product has been in
operation for more than 5 years or 30,000 kilometers (18,641 miles). BRP
shall be required to remedy only those nonconformities resulting from the
failure of components which have been installed in or on the Product for the
sole or primary purpose of reducing Product emissions and that were not in
general use prior to model year 1968.
The warranty period begins on the date the Product is delivered to its ultimate
purchase, or if the Product is first placed in service as a “demonstrator” or
“company” motorcycle prior to delivery, on the date it is first placed first placed in
service.
Items which are covered by the Emissions Performance Warranty for the full
useful life of the Product:
- Fuel System and Air Admission Systems
●
Fuel Injectors, Fuel Pump Module, Fuel Filter Ass’y, Throttle Body (Includ-
ing Throttle Position Sensor), Air Intake Manifold
- Ignition Components and Sensors
●
Engine Control Module (ECM), Engine Wiring Harness, Ignition Coils,
Spark Plugs (covered only up to the first maintenance replacement), Noise
Sensor (Knock Sensor), Camshaft Position Sensor, Crankshaft Position
Sensor, Temperature Sensor (Coolant), Pressure And Temperature
Sensor, Oxygen Sensors
- Exhaust System
●
Primary Muffler (Containing Catalytic Converter), Exhaust Manifolds
●
Clamps, Gaskets and Seals (from Engine up to Primary Muffler)
- Crankcase Ventilation System
●
Crankcase Vent Breather, Crankcase Vent Hose, Oil Filler Cap
- Evaporative Emission Control System
●
Fuel Tank, Fuel Cap, Fuel Hose, Vapor Canister, Vapor Canister Mount-
ing Bracket, Bleed Valve (Purge Valve), Check Valve, Filters, Evaporative
Components Mounting Brackets