Can-Am SPYDER RS Скачать руководство пользователя страница 93 | Manualshive

Страница: 93 / 147

Can-Am SPYDER RS Скачать руководство пользователя страница 93

MAINTENANCE PROCEDURES

NOTICE

Do not overtorque. Any

deformation on the panel around
the screw is an indication that it
is too tight. You may damage the
panel.

Tires

WARNING

Tires that are not the recom-
mended type,

damaged,

worn

down below the minimum tread
wear limit indicator or improperly
inflated can cause loss of control.
New tires will not operate at their
maximum efficiency until their
break-in is completed. Braking,
steering and VSS performance
may be reduced, so use extra
caution. Tires take about 300 km
(200 mi) of riding with frequent
braking to break-in. For riding with
infrequent braking, allow extra
time to break-in the tires.

The tires have been specifically de-
signed for the Spyder roadster. Use
only the BRP recommended tires,
which can be ordered only from an
authorized Can-Am roadster dealer.

Tire Pressure

Check pressure when tires are

cold

before using the vehicle. Tire pres-
sure changes with the air tempera-
ture. Recheck pressure if temperature
has changed (e.g., significant weather
change, driving in the mountains).

COLD TIRE PRESSURE

RECOMMENDATION

FRONT

Nominal

103 kPa (15 PSI)

Minimum

89 kPa (13 PSI)

Maximum

117 kPa (17 PSI)

REAR

Nominal

193 kPa (28 PSI)

Minimum

179 kPa (26 PSI)

Maximum

207 kPa (30 PSI)

NOTE:

The pressure difference be-

tween the left and right side tire should
not exceed 3.4 kPa (.5 PSI).

For your convenience, an electronic
pressure gauge is supplied in the tool
kit.

Tire Damage

Check all tires for:

– Cuts, slits and cracks in the tires.
– Bumps or bulges in the side of the

tire or the tread.

– Nails or other foreign objects in the

side of the tire or tread.

– Air leaks (hissing sound) caused by

an ill-fitting rim or a faulty tire valve.

If any of the above occurs, have the tire
repaired or replaced as soon as possi-
ble by an authorized Can-Am roadster
dealer.

Tire Tread Wear

Check minimum tread depth by using
the tread-wear indicators (hard rubber
bars molded at the base of the tread;
1 in figure below). Check in three loca-
tions across the tire tread:

– Outer edge
– Center
– Inside edge.

_______________

91

«
...
91
92
93
94
95
...
»

Содержание SPYDER RS




















































































































































Отзывы:

Нет отзывов