Can-Am SPYDER F3TM 2016, Руководство оператора

Страница: 150 / 171

US EPA EMISSIONS PERFORMANCE WARRANTY
Bombardier Recreational Products Inc. ("BRP')* warrants that if:
1. The vehicle is maintained and operated in accordance with the written instruc-
tions for proper maintenance and use, and
2. The vehicle fails to conform at any time during its useful life to the applicable
emission standards or family emission limits as determined by an EPA-ap-
proved emission test, and
3. Such nonconformity results or will result in the vehicle owner having to bear
any penalty or other sanction (including the denial of the right to use the vehicle)
under local, State or Federal law, then BRP shall remedy the nonconformity at
no cost to the owner; except that, if the vehicle has been in operation for more
than 5 years or 30,000 kilometers (18,641 miles). BRP shall be required to
remedy only those nonconformities resulting from the failure of components
which have been installed in or on the vehicle for the sole or primary purpose
of reducing vehicle emissions and that were not in general use prior to model
year 1968.
The warranty period begins on the date the vehicle is delivered to its ultimate pur-
chase, or if the vehicle is first placed in service as a “demonstrator” or “company”
motorcycle prior to delivery, on the date it is first placed in service.
Items which are covered by the Emissions Performance Warranty for the full use-
ful life of the vehicle:
Fuel System and Air Admission Systems
– Fuel Injectors, Fuel Pump Module, Fuel Filter Ass’y, Throttle Body (Including
Throttle Position Sensor), Air Intake Manifold
Ignition Components and Sensors
– Engine Control Module (ECM), Engine Wiring Harness, Ignition Coils, Spark
Plugs (covered only up to the first maintenance replacement), Noise Sensor
(Knock Sensor), Camshaft Position Sensor, Crankshaft Position Sensor, Tem-
perature Sensor (Coolant), Pressure And Temperature Sensor, Oxygen Sensors
Exhaust System
– Primary Muffler (Containing Catalytic Converter), Exhaust Manifolds
– Clamps, Gaskets and Seals (from Engine up to Primary Muffler)
Crankcase Ventilation System
– Crankcase Vent Breather, Crankcase Vent Hose, Oil Filler Cap
Evaporative Emission Control System
– Fuel Tank, Fuel Cap, Fuel Hose, Vapor Canister, Vapor Canister Mounting
Bracket, Bleed Valve (Purge Valve), Check Valve, Filters, Evaporative Compo-
nents Mounting Brackets
– Clamp, Seal, Gasket and Fitting (associated with fuel system assembly)
See maintenance information section in this operator’s guide for proper mainte-
nance. This operator’s guide contains information for proper use of the vehicle.
Under the Emissions Performance Warranty, BRP shall be liable for the total cost
of the remedy for any vehicle validly presented for repair to any authorized Can-Am
roadster dealer, unless for emergency repairs as required by item 2 of the follow-
ing list. State or local limitations as to the extent of the penalty or sanction imposed
upon an owner of a failed vehicle shall have no bearing on this liability.
148
______________