Can-Am Maverick Скачать руководство пользователя страница 130 | Manualshive

Страница: 130 / 147

Can-Am Maverick Скачать руководство пользователя страница 130

BRP LIMITED WARRANTY FOR THE EUROPEAN
ECONOMIC AREA, THE COMMONWEALTH OF
THE INDEPENDANT STATES AND TURKEY: 2014
CAN-AM

®

SSV

1) SCOPE OF THE LIMITED WARRANTY

Bombardier Recreational Products Inc. (“BRP”)* warrants its 2014 Can-Am
SSVs sold by Can-Am SSV distributors or dealers authorized by BRP to distribute
Can-Am SSVs (“Can-Am SSV Distributor/Dealer”).in member states of the Euro-
pean Economic Area (which is comprised of the member states of the European
Union plus Norway, Iceland and Liechtenstein) (“EEA”), in member states of the
Commonwealth of the Independent States (including Ukraine and Turkmenistan)
(“CIS”) and Turkey from defects in material or workmanship for the period and
under the conditions described below.

All genuine Can-Am SSV parts and accessories, installed by an authorized Can-Am
SSV Distributor/Dealer at the time of delivery of the 2014 Can-Am SSV, carry the
same warranty as that of the SSV.

This limited warranty will become null and void if: (1) The SSV was used for racing
or any other competitive activity, at any point, even by a previous owner; or (2)
the SSV has been altered or modified in such a way so as to adversely affect its
operation, performance or durability, or has been altered or modified to change its
intended use.

2) LIMITATIONS OF LIABILITY

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS EXPRESSLY
GIVEN AND ACCEPTED IN LIEU OF ANY AND ALL OTHER WARRANTIES, EX-
PRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES
ARE LIMITED IN DURATION TO THE LIFE OF THE EXPRESS WARRANTY.
INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM
COVERAGE UNDER THIS WARRANTY. SOME JURISDICTIONS DO NOT AL-
LOW FOR THE DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED
ABOVE, AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL
RIGHTS WHICH MAY VARY FROM COUNTRY TO COUNTRY.

Neither the Can-Am SSV Distributor/Dealer nor any other person has been autho-
rized to make any affirmation, representation or warranty regarding the product,
other than those contained in this limited warranty, and if made, shall not be
enforceable against BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

3) EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under this limited warranty under any circum-
stances:

– Normal wear and tear;
– Routine maintenance items, tune ups, adjustments (parts and labor);

128

______________

«
...
128
129
130
131
132
...
»

Содержание Maverick




















































































































































Отзывы:

Нет отзывов