Can-Am Hero-BK-PM, Руководство пользователя, Страница: 5 / 32

5
4 12V out 12V power output
E 2 pin Reserved
1
N/A , don’t connect anything!
2
Precautions
：
1). Pin 4 (12V out), current limit output 1A, load beyond power, will cause panel machine hardware
damage.
2). Pin 2 (LOCK_NONC_12V), current limit output 800mA, beyond the power of the latch access,
will cause panel machine hardware damage.
3). Pin 2 (LOCK_NONC_12V) and pin 3 (GND), please do not short-circuit, otherwise it will cause
hardware damage to the panel machine.
4). Pin 1 (PUSHOUT) and pin 4 (12V out), please do not short-circuit, otherwise it will cause
hardware damage to the terminal.
2.2 Connect the device to PC
Connect the network cable via RJ45 to your PC directly or router.
The default IP address of device is
192.168.1.100
, and it supports DHCP as default mode.
A. If there is a router, you can connect the device to router via RJ45 cable. Then you will get the
current IP address on the TFT screen, then search this device via your PC’s ARfacemanger (You
PC should be in the same router).
B. If there is a wireless router. You can only add the 192.168.1.*** IP segment in Advanced as the
following pictures. And connect the device to your PC directly, then search and set it via
ARFacemanager.