Can-Am DS 450 Series Скачать руководство пользователя страница 139 | Manualshive

Страница: 139 / 160

background image

– Damage caused by abuse, abnormal use, neglect or operation of the product

in a manner inconsistent with the recommended operation described in the
Can-Am ATV Operator’s Guide;

– Damage resulting from accident, submersion, fire, theft, vandalism or any act of

God;

– Operation with fuels, oils or lubricants which are not suitable for use with the

product (see the Operator’s Guide);

– Damages from rust, corrosion or exposure to the elements;
– Damage resulting from water or snow ingestion;
– Incidental or consequential damages, or damages of any kind including without

limitation towing, storage, telephone, rental, taxi, inconvenience, insurance
coverage, loan payments, loss of time, loss of income.

4) WARRANTY COVERAGE PERIOD

This warranty will be in effect from (1) the date of delivery to the first retail con-
sumer or (2) the date the product is first put into use, whichever occurs first and
for the following period:

SIX (6) CONSECUTIVE MONTHS, for private use or commercial use owners, ex-
cept that emission-related components installed on EPA certified ATVs registered
in the USA are covered for 5000 km or thirty (30) consecutive months whichever
comes first; and evaporative emission related components are warranted for
twenty-four (24) consecutive months. To obtain a list of the current warranted
emission-related components, please see an authorized Can-Am ATV dealer.

The repair or replacement of parts or the performance of service under this war-
ranty does not extend the life of this warranty beyond its original expiration date.

5) CONDITIONS TO HAVE WARRANTY COVERAGE

This warranty coverage is available

only

if

each

of the following conditions has

been fulfilled:

– The 2012 Can-Am ATV must be purchased as new and unused by its first owner

from a Can-Am ATV dealer authorized to distribute Can-Am ATVs in the country
in which the sale occurred (“Can-Am ATV dealer”);

– The BRP specified pre-delivery inspection process must be completed and doc-

umented and signed by the purchaser;

– The 2012 Can-Am ATV must have undergone proper registration by an autho-

rized Can-Am ATV dealer;

– The 2012 Can-Am ATV must be purchased in the country in which the purchaser

resides;

– Routine maintenance outlined in the Operator’s Guide must be timely per-

formed in order to maintain warranty coverage. BRP reserves the right to make
warranty coverage contingent upon proof of proper maintenance.

______________

137

«
...
137
138
139
140
141
...
»

Содержание DS 450 Series

































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DS 450 Series

Бренд: Taylor-Dunn Страницы: 126

Бренд: E-Z-GO Страницы: 66

Бренд: Eton Страницы: 30

Бренд: Columbia Страницы: 29

Бренд: Columbia Страницы: 30

Бренд: Humbaur Страницы: 4

2006 Sportsman 500 EFI

Бренд: Polaris Страницы: 126

Бренд: Baja motorsports Страницы: 44

Бренд: KAYO MOTO Страницы: 7

Бренд: Kellfri Страницы: 20

Бренд: Baja motorsports Страницы: 64

Бренд: Husqvarna Страницы: 56

Бренд: Husqvarna Страницы: 60

Бренд: Husqvarna Страницы: 60

Бренд: Husqvarna Страницы: 74

Бренд: MEV Страницы: 31

Бренд: Msied Страницы: 21

Бренд: Kolpin Outdoors Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды