CamTron ccd camera Скачать руководство пользователя страница 7

Страница: 7 / 22

Ultra High Resolution Color Camera

Note

Lens

The lens is not supplied with this camera. Purchase a lens suitable for

the environment. This camera accepts an auto iris lens, and both

C-and CS-mount lenses.

• It is recommended to use the DC type Auto Iris Lens to effectively

enjoy the major functions of this camera.
• Keep the lens surface clean, as the picture quality suffers if

there is dirt or fingerprints on the Lens.

Using an Auto Iris Lens

1. Strip 8mm of insulation from the end of the Auto Iris Lens cable..

2. Strip 2mm of insulation from each of the cores of the cable.

⑪

Video OUT Port

Video signals are output through this port. Connect this port to the Video IN

port of a Monitor/DVR.

⑬

Power IN Port

Connections for Camera power, as specified for each model.

approx. 8mm

approx. 2mm

⑫

Auto iris lens selection switch

Used to change between DC or Video depending upon the type of

auto iris in use.

Rear View

⑥
⑦

⑧

⑨

⑩

⑪

⑬

⑫

⑥

OSD Setup Buttons

ㆍ

SET Button : Displays the menu on the screen. Press this button to confirm

status or after changing a selected item.

ㆍ

Up and Down Button : Used to move the cursor up or down in the menu

screen to select a desired menu item.

ㆍ

Left and Right Button : Used to move the cursor left or right in the menu

screen or to change the value of the selected item.

⑦

D & N Input Port (GND : BW, Open : Color)

Switch to Day or Night Mode by connecting an external signal to this port.

⑧

MD Output Port

Motion detection signal is output through this port.

⑨

RS-485 Control Port

The SETUP MENU can be controlled via this port using an external controller that

supports RS-485 communications. For details, see page 19.

⑩

Power LED

When power is properly connected, the LED illuminates.

3±0.5sec

There is motion

+4.0V ~ +4.5V (less than 10mA)

There is motion

■

Overview

Installation Procedures

■

Содержание ccd camera























Результаты поиска

Содержание ccd camera

Отзывы:

CamTron ccd camera, Инструкция по эксплуатации, Страница: 7 / 22

Результаты поиска

Содержание ccd camera

Отзывы: