2
NOTE: While fitting your G-51 and choosing which holes to use in the hub, keep in mind the relationship
between the surface you are using to mount G-51 and the position of camera. This will help you to
choose correct hub holes.
Gripper Setup
Take Camera Mount Hub, screw either 3” or
6” extension rod into one of the central
holes. Repeat this process with other two
rods to build your tripod.
Now insert Ball Tilt Head into the rod and
tighten to secure properly. Then screw-in
another length of rod into ball tilt head.
Adjust the distance of tripod legs by adding
different length of extension rods, as
required, to reach mounting surface.
To guarantee proper adhesion of suction cups, check that the surfaces of both, suction cup and
mounting surface are clean & dry. Please mount the device on smooth, even and non-porous surfaces.
Remove the complimentary dust cover and
place your first suction cup on the selected
position from where you want to shoot. Lock
the suction cup with lever on it. Repeat this
process for all suction cups.
NOTE: Make sure to tighten all connections to avoid accidental loss of camera and rig.
Add the second set of Ball Tilt Heads to
suction cups and tighten to properly secure
them.
