6
4. Insert bolt in the rear anchor bracket (
B1-B2
) as
Fig. 4
CAUTION: Make sure that the bolt is inserted in the
right direction. See Fig. 5
Fig. 5
5. Loosen and remove flange bolt (
1
) to remove
knuckle pin (
2
) and decouple lower suspension arm
from wheel hub. See Fig. 6
Fig. 6
6. Install the anchor bracket (
B1
-
B2
) under lower
suspension arm. Make sure to hook the bracket’s
C–shaped back end on the a-arm. See Fig. 7
Fig. 7
7. Insert the new 5/8-11 bolt (
B3
) in the anchor
bracket, through the lower suspension arm and the
wheel hub. Secure assembly using the new 5/8–11
nut (
B4
) provided. Tighten bolt to 108 N•m [80 lb•ft].
Fig. 8
