10
STEERING LIMITER INSTALLATION
10.Assemble steering limiter cables
(C2)
, aluminum
disks
(C1)
and
step spacers
(C5)
together as
shown on Fig. 22
Fig. 22
IMPORTANT
11.Apply grease evenly all around step spacer bushing
(C5)
and in hole of aluminum disk
(C1)
when
assembling these parts together. See Fig. 23
Fig. 23
12.Attach steering limiter cable assembly under anchor
bracket using bolt (
C3
) inserted through bracket
cover, washer (
C6
), and nut (
C7
). Tighten nut to 50
N•m
[37 lb•ft]. Refer to Fig. 24
NOTE: Make sure arrow on top of aluminum disk
points towards front of vehicle.
Fig. 24
IMPORTANT
13.Make sure aluminum disk pivot point is installed in
front of steering limiter cable. See Fig. 25
Fig. 25
FRONT
