background image

kg

kg

BATTERY

TO REPLACE BATTERY

picture 1

picture 2

C

R

20

32

battery baffle

black tab

contact

CR

20

32

Condition 1

: Open battery case cover on the back 

                      of scale, if battery case is the type 
                      shown in picture 1,
A.  Bend the small black tab outwards and the 
     battery will come out .Take note not to bend the 
     contact.
B.  Install new battery by putting one side of the
     battery beneath the contact and then pressing
     down the other side.

Condition 2

:Open battery case cover on the back 

                     of scale, if battery case is the type 
                     shown in picture 2,
A.  Take out the used battery with the aid of a
     sharp object, as shown in picture 2.
B.  Install new battery by putting one side of the
     battery beneath the battery baffle and then
     pressing down the other side.

STEP 2. Gently step on the scale, then the scale
              will be automatically  turned on. Stand
               evenly on the scale without moving an d  
               wait until your weight shown on display
               is stable and locked. 
                 

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically 

switch off. Auto shut-off occurs if display shows

the same weight reading for approximate 8 

seconds.

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric(kilograms) and 
Imper ial (pounds, stones), you can convert weight unit as follow: 

Condition 1: if the unit switch is inside battery case,

A.   Open  battery  case  cover  on  the  back  

     of scale.

B.   Pull  up  and  down  the  unit  switch  to  convert

     scale unit between kg-lb-st.

Unit switch

kg/lb/st

picture 3

Condition 3

:Open battery case cover on the back 

                     of scale, if battery case is the type 
                     shown in picture 3,
A. Take out the used batteries (with the aid of a 
    sharp object, if needed)
B. Install new battery by putting one side of the 
    battery and then pressing down the other side.
    Please take note to the polarity.

OPERATION

Type 1

.  1x3V lith ium battery (CR2032). Please

               remove the isolation sheet from the
               battery contact before use.

Type 2

.  2x1.5V AAA batteries (not included)

STEP 1. To make sure accuracy, always put 
               the scale on a hard and flat surface 
               like wooden or marbel floor 
               (avoid carpet or soft surface).

Отзывы: