TIMER
Clear Protective
Cover/ Tray
Scale
• What’s in the box?
start here.
quick start guide
Platform
Silicone
Pad
MODE
Indicator
Battery
Life Icon
Coffee
Bean Icon
Kettle
Icon
MODE
Button
RATIO
Button
ZERO
Button
UNIT
Button
ON/OFF
Button
TIMER
Button
USB Charging Port
Protective Cap
Timer
Readout
“Target” Rate
Bar Segments
“Actual” Rate
Bar Segments
Ratio / Target
Weight Readout
Actual
Weight
Readout
Weight
Unit
LCD
Readout
• Components
back of scale
front of scale
interface
•
Open the orange USB port cover at the back of the scale.
•
Insert a micro USB cable into the port.
•
Insert the large end of the USB cable into a USB compatible outlet to
charge your scale’s battery.
•
The scale will automatically turn on to verify that the charging
cord is correctly connnected. We recommend turning off the scale
manually at this time to reduce charging time.
•
When charging is finished remove USB cable from scale and replace
the port cover.
• Charging the Battery
• Turning
Scale On
• Auto-off
Function
set to 180 seconds
by default
•
Turn off the scale.
•
Press and hold the ON/OFF button.
•
While holding the ON/OFF button, press the ZERO button 4-5 times
quickly until “180” is shown on the LCD display.
•
Release both buttons.
•
Press the ZERO button to switch between “0/60/120/180”.
•
If “0” is selected, the Auto-off function will be disabled.
•
After choosing the desired time, press the ON/OFF button again.
•
The display will show “PASS” to confirm this setting.
•
The scale will turn off automatically.
•
Note
: To keep a longer battery life, please turn off the scale by
pressing ON/OFF button after each use.
•
Press the ON/OFF button once to power on the scale.
˗
Wait for scale to zero before adding weight to the platform.
˗
Scale returns to last mode used when turned on.
•
The brewing ratio will display in the upper right for 3 seconds then go
blank.
˗
The last ratio that was used will be displayed.
•
Press “ON/OFF” button to turn on your scale. Wait until the LCD
displays zero.
•
The display will read “ A ” (automatic) or “ M ” (manual) in the
upper left of the LCD readout.
•
Press MODE button to toggle between these two modes.
• Mode Setting
Silicone
Insulating Pad
USB cord
ratio : scale
BWRRS1
Scan for Video
