13
HOW TO CLEAN THE FILTER
Cleaning the Lint Filter
Cleaning the water inlet filter
• Clean the filter when water leaks from the water inlet.
Cleaning the drain filter
• In case “Pump-Model” drain hose, this filter’s equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons, etc.
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be
caused.
1
Pull the Fiter frame up-
ward.
2
Turn the lint filter inside
out, wash to the lint off
with water.
3
Return the filter as it was,
and insert the filter frame
into the slot.
1
Pull the power
plug out before
cleaning it.
2
Turn off the water
supply to the
washer and
seperate the inlet
hose.
3
Pull the inlet filter
out.
4
Remove the dirt
from the inlet filter
with a brush.
Lint Filter
Filter Frame
1
Put down the remained
water in the hose. And
put a container under the
filter to collect water.
2
Turn the cap counter
clockwise.
3
Pull out the filter
assembly off the case.
4
Clean the drain filter
removing the foreign
stuffs.
5
Put the filter into the
case. And turn the cap to
adjust the prominence of
the filter to the hole of the
case.
6
Turn the cap clockwise
tightly.
FILTER
FILTER
FILTER
CAP
CAP
CAP
CAP
CAP
CASE
CASE
STOPPER
STOPPER
CONTAINER
